Ideatomorrow Top Banner


Carepeutic® Ozone Waterfall Foot and Leg Spa Bath Massager

$229.95

Regain Your Healthy Living. Relax Your Weary Foot!

Treat your feet with the undeniable luxury comfort! Integrating ozone benefits into hyperthermia healing therapy, this Carepeutic Ozone Waterfall Foot and Leg Spa Bath Massager makes hot-tub spa a natural and effective way to relieve your painful, sore, tired feet and refresh meridians of body through its heated, O3 water.

Featuring four different automatic massage programs with selection of rolling massage, ozone therapy, air bubble massage, and heated water surfing therapy, it boosts circulation to bring oxygen to the tissues to soothe sore muscles on legs and feet. With the four built-in motorized massage rollers located inside the calf-deep water container, when the waterfall or water jet surfing system is activated, it gives you hot-steam rolling massage on sole and effectively melt away your calf and foot stress while you are enjoying the hot-tub spa.

Equipped with advanced water temperature automatic balancing system, its thermal control device will be activated automatically to turn on or off the heating function when its current water temperature is lower or higher than your selected temperature, you can simply sit back and relax. The strong waterfall and two powerful water jets circulate water with moist hot air bubbles, which helps stimulate foot reflex zones and relieve your foot tension with motorized, heated water rolling massage.

In addition to its double insulation design and overheat protection, it has built in hidden and yet motorized smart water drainage system that can automatically lock or unlock the spa system when draining out water, simply press one button to open the hidden drainage valve to remove water without lifting up the container or taking it to bathroom, safety is completely attested. You can choose to add herbal bag or bath oil into its detachable herbal bag container or use its extra mineral stone container come with the package. Its built in hidden compartment for power cord storage and built in mobile casters make convenience for storage or transport. Its extra large water container fits foot with any size.

Features:

  • Ozone therapy: Integrating ozone benefits into hyperthermia healing therapy to relieve painful, sore, tired feet and refresh meridians of body through its heated, O3 water.
  • Motorized rolling massage: Combined action of ozone therapy and heated water surfing and rolling massage to boost and increase uptake of oxygen and improve body circulation.
  • Waterfall or water jet surfing system: Strong air bubble massage with selection of waterfall or water jet function, waterfall and water jet can work alone or simultaneously.
  • Infrared heat therapy: Strong waterfall and two powerful water jets circulate water with infrared heat and moist hot air bubbles, which helps stimulate foot reflex zones and relieve your foot tension.
  • Smart thermal control: With smart thermal control water temperature automatic balancing system, which will be activated automatically to turn on or off the heating function when its current water temperature is lower or higher than its selected temperature.
  • Hidden and motorized smart water drainage system: Automatically lock or unlock the spa system when draining out water, simply press one button to remove water without lifting up the container or taking it to bathroom, safety is completely attested.
  • Double insulation: Adopt ceramic and mica insulating design, double insulation for water and electricity to maximize safety protection.
  • Spacious and calf-deep water container, water height about 18-20 cm, suitable for foot size up to 14.
  • With built in hidden compartment for drainage valve and power cord storage, very convenient to carry on.
  • Equipped with detachable herbal bag container, one extra mineral stone container included.
  • Over-heat protection.
  • Four selective automatic massage programs.
  • Motorized rolling massage with 4 massage rollers.
  • Selective water temperature based on different needs.
  • Luxury and fashion design with built-in carrying handle.
  • Smart design with LED indicator and neon light on control panel.
  • Built-in mobile wheels, convenient for transport or storage.

Specifications:

  • Default massage time: 50 minutes.
  • Default water drainage time: 3 minutes.
  • Default water temperature is 35°C/95°F (lowest) to 40°C/104°F (highest).
  • The maximum heating water temperature you can set is 48°C/117°F.
  • The minimum heating water temperature you can set is 35°C/95°F.
  • Rated voltage: 110V/60Hz UL power cord.
  • Power consumption: 800W.
  • Luxury water container, big enough for any foot sizes.
  • Water container dimension (inside): 15.25 L x 13.5 W x 9 H
  • Product dimension: 21 L x 16.3 W x 16.6 H (inches)
  • Product weight: 14.5 lbs
  • Water container: 15.25 L x 13.5 W x 9.5" H
  • Shipping dimension: 22 x 18 x 17.25 inches.
  • Shipping weight: 19.3 lbs

EXCLUSIVE

FAQ:

Q: Massage function is not working under P2/3/4.

  • P2/3/4 modes are preset massage program. Everything is preset except Heating function.
  • Under P2/3/4 mode, functions such as rolling massage, air bubble, etc, are preset and cannot be adjusted, and will turn On/Off automatically in certain interval or up to certain water temperature (e.g. when water temp reaches 39C degrees the rolling massage will start automatically and then stop after 2 or 3 minutes and so on).
  • Under P2/3/4, rolling massage will start and stop in any interval (preset program).
  • Under P2/3/4, whenever you press the Massage button or Air Bubble button, it'll switch the mode back to P1 again.

Q: Rolling Massage is not working under P1:

  • Under P1, you can adjust any functions such as Massage, Heating, Air Bubble, Ozone.
  • You can press the Massage button to activate the rolling massage.
  • If you do not press the Massage button, the rolling massage will start automatically when its water temperature reaches 42C degrees. (Assuming that you set your highest temperature level up to 42C or higher).

Q: Unable to open the drainage compartment door.

  • The drainage compartment door stuck due to its residue on the output valve from last use. Using a small tool kit to open the door from its open area. To avoid this, always use a dry towel to clean up the end side of output valve after drainage.

Q: Should I unplug power before drainage?

  • Not to unplug power cord before drainage. But you need to press the On/Off button to turn OFF the device first and make sure the power cord storage compartment door is closed (The power cord extended outside from its power cord output area).

Q: Stop draining after 3 minutes:

  • Refer to page 13 on manual. Its default drainage time is 3 minutes. Drainage will stop automatically after 3 minutes.You can start over the drainage cycle again if there is more water left inside water container.
  • After 3 minutes, if water is not completely drained out, you can press the Drainage button to do draining again. If it does not do draining, try to turn off the power completely, wait for about 5 minutes, turn on the power again, and then press the Drainage button to do draining again. 

Q: Drainage function is not working sometimes:

  • You must press the On/Off button on control panel to turn OFF all functions and power before trying to press the Drainage button.
  • If you press the Drainage button while Massage or Air Bubble or Heating is running, its safety locking system will lock up the drainage function automatically and you will not be able to drain again. And it may also cause malfunction on the drainage.
  • If there is malfunction on drainage, follow the steps below to reboot the device:
    • Press the On/Off button to turn OFF the power, and then unplug the power cord from wall outlet.
    • Wait for 30 to 45 minutes and then plug in the power cord again.
    • Press the On/Off button to turn ON power. (Do not press any other buttons).
    • Open the drainage pipe cover and put a small water container under the drainage pipe for water.
    • Press the Drainage button on control panel to start draining.

Q: Adding bath salt or oil into the water container:

  • It is not recommended to add bath salts or essential oil into the water container because the device has water wave surfing function with heat and it may block the water pipe or filter if it is not cleaned up properly right after use.
  • If you choose to, you can add small amount of bath salt or bath oil (such as tea tree essential oil or similar ones) to the water container after the water is being heated up or under surfing function. Or, you can have the salts or essential oil dissolved in water prior putting it into the water container.
  • Whenever you put bath salts or essential oil into the water, make sure you clean up the water container right after use to make sure no any salt or oil left inside water pipe or water filter.
  • The proper way to clean up the water container is to use clean water to run through the water surfing function for about 30 seconds and drain out water completely so as to make sure there is no any left over inside the water pipe.

Q: Water drops left inside water container:

  • Each foot spa is tested with water on assembly line at factory. It is normal if you see few water drops left inside the water container. It is safe to use.


  • Model: KH298
  • Shipping Weight: 19lbs
  • 500 Units in Stock


Copyright © 2009-2024 Carepeutic Global Lab. Powered by Carepeutic, all rights reserved.